Microprocessor Controlled Mosfet Isolator
MARINE GRADE DUAL BATTERY CONTROLLER
2 SIZES AVAILABLE
12V 80 AMP WITH 160 AMP SURGE
OR
12V 150 AMP WITH 300 AMP SURGE
FULLY AUTOMATIC
STARTER BOOST FUNCTION
BUILT IN SPIKE AND SURGE PROTECTION
FULLY AUTOMATIC CONTROL ISOLATES
STARTING BATTERY WHEN ENGINE
IS NOT RUNNING.
No voltage drop (0.016 at 20A)
Fully sealed construction
Working Principle Of BiSolator M-Series:-
The BiS M-Series performs well to provides a reliable and efficient method of both charging and isolating
dual batteries.
With BiSolator’s electronic voltage and load sensing design on the main 12V system, when the voltage rises
above 13.3V for at least 12 seconds, as happens when the engine is running normally, the BiSolator will close
the isolating system, providing charging current to the auxiliary battery and overcomes those deficiencies that
allow other battery isolators, splitters or combiners to discharge the main battery.
When the system is in the status of charging the auxiliary battery or when auxiliary charging from solar or mains
charger is being performed the featured LED indicator then turns “GREEN” to show the exact operating
diagnostics of battery system.
Boost / Jump starting is possible by fitting a simple toggle switch to the starter sense wire.
Mosfets are high current electronic switches. Basically a solid state relay,
they are very reliable and have no moving parts to wear out or contacts
that can burn or arc like relays and solenoids.
Please Note: These units are not simple diode isolators